garu...@azules.eu schrieb am 20.04.2024 um 23:00:
I can not figure out why this progress bar only works when \showframe is
activated.
When you comment on \showframe, it's as if \realpageno is at zero.
(current version: 2024.04.01 08:59)
\showframe
\startuseMPgraphic{MonGraphisme_MP
I can not figure out why this progress bar only works when \showframe is
activated.
When you comment on \showframe, it's as if \realpageno is at zero.
(current version: 2024.04.01 08:59)
\showframe
\startuseMPgraphic{MonGraphisme_MP}
numeric n ; n := \number\realpageno ;
numeric m ; m
e I cannot just adjust
> slightly adjust the dimensions to get rid of that.
It seems that you can place the figures somehow
(https://www.pragma-ade.nl/general/qrcs/setup-en.pdf#page=169):
See the extreme example:
\showframe\showgrid\showstruts
\setupexternalfigures
[location={lo
On 4/19/24 17:51, Denis Maier via ntg-context wrote:
> Hi again,
>
> another follow up. Can anyone confirm this issue? Is there a way to set
> the minimal width of graphics?
Hi Denis,
maximum widht or height work fine, but their minimum counterparts seem
not to be working at all:
Dear Pablo,
Here is my example:
\setuppapersize[A4]
\setupbodyfont[termes, 12.50pt]
\setuplayout[backspace=2.9cm,
width=fit]
\ininnermargin{\blackrule[color=black, height=0.10ex, width=1cm]\\{3.2.2}}
\dontleavehmode \blackrule[color=black, height=0.10ex, width=13.50cm]
\showframe
Am 26.03.24 um 17:12 schrieb Wolfgang Schuster:
begin example
\showframe
\definetext
[chapterheader] % identifier
[header] % vertical position (header/footer)
% [text] % horizontal position (text/margin)
[This is a custom header for \tex{chapter}] % content
quot; in the following example.
begin example
\showframe
\starttext
\setuphead[chapter][header=high]
\chapter{Lorem Ipsum}
\dorecurse{10}{\samplefile{lorem}}
\setuphead[chapter][header=empty]
\chapter{Lorem Ipsum}
\dorecurse{10}{\samplefile{lorem}}
\stoptext
end example
A
, how?
When you use "header=high" you can't have a header because the block for
it no longer exists, compare the results for "header=high" and
"header=empty" in the following example.
begin example
\showframe
\starttext
\setuphead[chapter][header=high]
\ch
,width=4cm]
\inrightmargin{\blackrule\\{3.2.2}}\par \dontleavehmode \blackrule
\showframe
\starttext
Me
\stoptext
Von: Pablo Rodriguez via ntg-context
Gesendet: Freitag, 15. März 2024 20:00:35
An: ntg-context@ntg.nl
Cc: Pablo Rodriguez
Betreff: [NTG-context] Re
=footer]
\setupheadertexts[\CONTEXT\ imposition test]
\showframe
\setupbackgrounds [text][text][background=color,backgroundcolor=lightgray]
% Where the block of pages is placed on the sheet
% (relevant if there is space left over.)
\setuplayout [location=middle,marking=on]
\startbuffer[Fakepage
On 3/15/24 14:06, Ursula Hermann wrote:
> Dear List,
Dear Ursula,
this might help you (it isn’t perfect, but you just seem to copy and
paste fragments from your source files):
%\showframe\showstruts
\mainlanguage[de-at]
\setuppagenumbering[alternative=doublesided]
\definemargind
odyfontsize,
footerdistance=\bodyfontsize]
\definehighlight
[sesamedot]
%\showframe
%\showgrid
%\showboxes
%\showmakeup
% [glyph,fontkern]
\starttext
\starttitle [title={ごん狐}]
[author={新美南吉},source={https://www.aozora.gr.jp/cards/000121/files/628_14895.html}]
\startsubject [title={一}]
これは、\ruby
l-Fārābī, محمد فارابی), par le biais d'une précision
sur Platon, avec des indications sur son nom en arabe, on aura fait le
tour de quelques difficultés qui se présentent à ceux qui voudraient
établir avec soin des documents un peu exigeants.
% \showframe
\startMyFrame[Title=Con
/limitations.
What is the the easiest way to achieve this?
begin example
\setuppagenumbering
[alternative=doublesided]
\setuplayout
[width=10cm,
rightmargin=6cm]
\showframe
\def\FloatTableALignment
{\dowithnextbox
{\ifdim\nextboxwd>\textwidth
\doalignedline{in
ge]
\setuppagenumbering
[state=stop]
\setupmakeup
[standard]
[align=middle]
\setupblank
[2*line]
\showframe
\starttext
\dorecurse{12}{%%
\startstandardmakeup
Text \blank
{\tfd\recurselevel} \blank
Text
\stopstandardmakeup
\page}
\stoptext
That's how I
ow}, width=\outermarginwidth,
headcolor=red, color=green, style={\tfx\setupinterlinespace}, align=width]
\setupexternalfigures[location=default]
\setupmargindata[style={\tfx}, stack=yes]
\setupmargindata[inouter][color=orange]
\setupmargindata[ininner][color=blue]
\showframe
\starttext
\section{Margin Tes
Thanks Wolfgang.
Is this expected behavior? I'm very much confused with my second example:
\setuppapersize[A5][A4]
%\setuplayout[location=middle]
\setuplayout[location=middle,width=middle]
%\setuplayout[location=middle,width=middle,backspace=2.5cm]
\usemodule[ipsum]
\starttext
\showframe
Hello
=0mm,
height=250mm]
\starttext
\showlayout
\stoptext
Another example:
\setuppapersize[A5][A4]
\setuplayout[location=middle]
\usemodule[ipsum]
\starttext
\showframe
\ipsum
\stoptext
Thanks,
Jean-Guillaume
mise_en_page-layout.pdf
Description: Adobe PDF document
add width=fit, such as in:
\setuplayout[width=fit, leftmargin=6cm,rightmargin=10cm]
\showframe
\starttext
\ConTeXt\space\contextversion\blank
before the \type{\starttext}:\crlf
\type{\setuplayout[leftmargin=6cm,rightmargin=10cm]}\crlf
make no difference in displayed frame
width=fit, leftmargin=6cm,rightmargin=10cm]
\showframe
\starttext
\ConTeXt\space\contextversion\blank
before the \type{\starttext}:\crlf
\type{\setuplayout[leftmargin=6cm,rightmargin=10cm]}\crlf
make no difference in displayed frame
\showlayout
\stoptext
I wonder whether I might be missing
what is left][rightmargin 60mm]
this should leave 210-40-60=110mm in the middle, but doesn't.
The textwidth is narrowed but the margins refuse to obey their setting.
yours sincerely
dr. Hans van der Meer
\setuppapersize[A4][A4]
\setuplayout[leftmargin=40mm,rightmargin=60mm,textwidth=110mm]
\showframe
in the middle, but doesn't.The textwidth is narrowed but the margins refuse to obey their setting.
yours sincerelydr. Hans van der Meer\setuppapersize[A4][A4]\setuplayout[leftmargin=40mm,rightmargin=60mm,textwidth=110mm]\showframe\starttextsetuplayout: leftmargin=40mm, rightmargin=60mm, textwidth=110mm
On 11/19/23 13:27, Miguel Diaz wrote:
> [...]
Hi Miguel,
I don’t use the grid. This is also the default in ConTeXt.
I’m not sure whether I’m getting your point here.
See what the difference between not enabling the grid and enabling it:
\showframe\showgrid
\setupwhitespace[med
Csikos Bela schrieb am 20.10.2023 um 14:53: > Hello: > > Protrusioin doesn't
work in framed environment. > > This is a short code: > >
\definefontfeature[default][default][expansion=quality,protrusion=quality] > >
\setupalign[hz,hanging] > > \showfram
I forgot to attach the pdf. Eredeti levél Hello:Protrusioin
doesn't work in framed environment.This is a short
code:\definefontfeature[default][default][expansion=quality,protrusion=quality]\setupalign[hz,hanging]\showframe\starttext\input
tufte\blank\framed[frame=off,location
Csikos Bela schrieb am 20.10.2023 um 14:53:
Hello:
Protrusioin doesn't work in framed environment.
This is a short code:
\definefontfeature[default][default][expansion=quality,protrusion=quality]
\setupalign[hz,hanging]
\showframe
\starttext
\input tufte
\blank
\framed[frame=off
Hello:Protrusioin doesn't work in framed environment.This is a short
code:\definefontfeature[default][default][expansion=quality,protrusion=quality]\setupalign[hz,hanging]\showframe\starttext\input
tufte\blank\framed[frame=off,location=top,align=normal,offset=0pt]{\input
tufte
}\blank
the below code but the 3 digit labels'
left sides go into the left > > margin. How can I fix it? > > > > Code: > > > >
\showframe > > \starttext > > \startitemize[n,broad][itemalign=flushright] > >
\dorecurse{250}{\item } > > \stopite
right and the widest
> > label's left side located at the left margin.
> > I tried the below code but the 3 digit labels' left sides go into the left
> > margin. How can I fix it?
> >
> > Code:
> >
> > \showframe
> > \starttext
> > \start
but the 3 digit labels' left sides go into the
left margin. How can I fix it?
Code:
\showframe
\starttext
\startitemize[n,broad][itemalign=flushright]
\dorecurse{250}{\item }
\stopitemize
\stoptext
You can use the width-key to set a value for the number, below is a
example for method
tried the below code but the 3 digit labels' left sides go into the
> left margin. How can I fix it?
Hi Csikos,
width is the key, such as in:
\showframe\showgrid\showstruts
\starttext
\startitemize[n,broad][width=.125tw, itemalign=flushright]
\dorecurse{250}{\item }
\stopitemize
margin. How can
I fix
it?Code:\showframe\starttext\startitemize[n,broad][itemalign=flushright]\dorecurse{250}{\item
}\stopitemize\stoptextThe resulted pdf is attached as
context-itemize-label-alignment.pdf.Thank you in advance,bcsikos
context-itemize-label-alignment.pdf
Description: Adobe PDF
Two column text that ends near the foot of a page can push the next line into
the footer rather than starting a new page.
MWE for ConTeXt ver: 2023.09.26 18:19 LMTX :-
\setuppapersize [A4]
\showframe
\starttext
Knuth in knolumns
\dorecurse{30}{\crlf}
\startcolumns
\input knuth
\stopcolumns
:
\showframe\showgrid\showstruts
\setuppapersize[A6]
\setupitemgroup
[itemize][1]
[ before={\blank[quarterline]},
after={\blank[quarterline]\null}]
\starttext
one
\startblockquote
\startitemize
\item
On 9/26/23 12:52, gerard.degreve wrote:
> Hello Pablo,
>
> Just try to do this :
>> \setupitemgroup
>> [itemize][1]
>> [ before={\blank[.125th]},
>> after={\blank[.125th]}\strut]
Hi Gerard,
this also works with \null, but not well with small dimensions:
in file './pablo.tex': Me (badness
1448)
tex error > tex error on line 7 in file ./pablo.tex: Undefined control
sequence
\margintext{\blackrule\\{Me}}\dontleavethemode
\blackrule
1 \setuppapersize[A8,landscape]
2 \setuplayout[leftmargin=2.5cm,
3 leftm
Dear List,
After compiling the following example, which is from February 2021:
\setuppapersize[A8,landscape]
\setuplayout[leftmargin=2.5cm,
leftmargindistance=0.2cm,
backspace=2.9cm,
width=4cm]
\showframe
\starttext
\margintext{\hairline\\{Me
is that both values are reset on the following page and
with \startsectionblockenvironment
you can make this layout change in the style file of your document.
\startsectionblockenvironment[frontpart]
\setupheader[state=high]
\setupfooter[state=high]
\stopsectionblockenvironment
\showframe
\starttext
bruary 2021:
\setuppapersize[A8,landscape]
\setuplayout[leftmargin=2.5cm,
leftmargindistance=0.2cm,
backspace=2.9cm,
width=4cm]
\showframe
\starttext
\margintext{\hairline\\{Me}}\dontleavehmode\hairline
\startformula
a^n + b^n = c^n.
\stopformula
\stoptext
,landscape]
\setuplayout[leftmargin=2.5cm,
leftmargindistance=0.2cm,
backspace=2.9cm,
width=4cm]
\showframe
\starttext
\margintext{\hairline\\{Me}}\dontleavehmode\hairline
\startformula
a^n + b^n = c^n.
\stopformula
\stoptext
I get:
Command Line: context.exe
if this has been reported yet.
All best
Thomas
\setuppapersize[A4,landscape]
\setuplayout[height=fit,
width=middle,
header=0cm,
footer=0cm,
leftmargin=2cm,
topspace=1.2cm,
backspace=1.5cm]
\showframe
tmargindistance=-\rightmargintotal,
default={inner,none,low,high},
]
\setupcaption[marginfigure][
style={\ss\tfx},
align={flushleft},
width=\leftmarginwidth,
%location={innermargin,low},
]
\starttext
\showframe
\startplacemarginfigure[
location={inner,3*hang},
title={My caption shou
te:
Hi Keith,
Here an example that Mikael made for such a book:
\showframe
% let's very strict
\startsetups [*default]
\directsetup{*reset}
\frozen\widowpenalty 1
\frozen\clubpenalty 1
\frozen\displaywidowpenalty 1
\frozen\brokenpenalty 0 % \
Thanks Hans!
I'll have a play and keep an eye on updates
Best Wishes
Keith
On 21/07/2023 17:10, Hans Hagen via ntg-context wrote:
Hi Keith,
Here an example that Mikael made for such a book:
\showframe
% let's very strict
\startsetups [*default]
\directsetup{*reset}
\frozen
Hi Keith,
Here an example that Mikael made for such a book:
\showframe
% let's very strict
\startsetups [*default]
\directsetup{*reset}
\frozen\widowpenalty1
\frozen\clubpenalty 1
\frozen\displaywidowpenalty 1
\frozen\brokenpenalty 0
27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-
vz.pdf
Description: Adobe PDF document
\starttext
\startbuffer[vz-1]
\starttext
\showframe[text]
\enabletrackers
the same as in the manual) shows that some
column set spans don’t appear:
\showgrid\showframe
\definecolumnset[Beispiel][n=3]
\definecolumnsetspan[Zwei][n=2,color=blue]
\definecolumnsetspan[Drei][n=3,color=red]
\starttext
\startcolumnset[Beispiel]
\startcolumnsetspan[Drei]% this works
{\bfd
I found a MWE that shows the problem:
"""
\setuppapersize[C5]
\showframe
\starttext
\startplacefigure[location=page,title={Pagefloat}]
\framed[width=\textwidth,height=.75\textheight]{TEST}
\stopplacefigure
\dorecurse{4}{\section{Tufte \recurselevel}
\samplefile{tuf
,
align={flushleft,broad}
]
{\startexemple
\getinlineuserdata
\stopexemple}
\stopsetups
\showframe
\starttext
\startchapter[title={First Chapter},ownnumber=1]
\startdefinition
\input ward
\stopdefinition
\startuserdata [margintext]
\input ward
\stopuserdata
of the
combination coincides with the centre of the text area of a page.
Hi Keith,
I think the following sample might achieve what you want:
\showframe
\setupexternalfigures[location={default}]
\setuplayout
[backspace=2.5cm,
topspace=1cm,
height=28cm,
width=17cm,
header=0cm
,
]
\setuppagenumbering[state=start,alternative=doublesided,location=margin]
\useMPlibrary [dum]
\starttext
%%% Me %%%
\showframe [text] [text]
\definelayer[test3]
\setlayer[test3][]
\centerbox{
{\startcombination[nx=3,ny=1,distance=15mm,after=,location=middle]
{\externalfigure[dummy
gt; > >
> > > \useMPlibrary [dum]
> > >
> > > \starttext
> > >
> > > \definelayer[test3]
> > >
> > > \setlayer[test3][x=2cm,y=15cm]
> > >
> > > {\startcombination[nx=3,ny=1,distance=15mm,after=,location
text
> >
> > \definelayer[test3]
> >
> > \setlayer[test3][x=2cm,y=15cm]
> >
> > {\startcombination[nx=3,ny=1,distance=15mm,after=,location=middle]
> >
> > {\externalfigure[dummy]}{}
> >
> > \rotate[rotation=90]{\externalfigure[dumm
On 3/16/23 17:59, Keith McKay via ntg-context wrote:
> Hi,
>
> I would like to position a combination of images where the centre of the
> combination coincides with the centre of the text area of a page.
Hi Keith,
I think the following sample might achieve what you want:
]}{}
{\externalfigure[dummy][]}{}
\stopcombination}
\flushlayer[test3]
\stoptext
\useMPlibrary [dum]
\showframe [text] [text]
\setuplayout [tight]
\starttext
\centerbox
{\bTABLE[frame=off,offset=7.5mm,align={middle,lohi}]
\bTR
\bTD
\externalfigure[dummy
eld[Text][Text],
direction = "down",
alternative = "linear",
colors = { "MyColor1", "MyColor2" },
] ;
StopPage;
\stopMPcode}
]
\showframe
\setupbackgrounds[page][background=apage]
\setupbackgrounds[footer][text] [background=color, backgroundcolor=blue]
Hi,
I need to have a table set with tabulate centered and a bit narrower. But it
seems that \startnarrow has no effect on the tabulate. Am I missing something ?
Is there a better way to achieve the same thing?
Best,
Denis
\starttext
\showframe
\startplacefigure[location=force,number
:
On 2023-02-15 08:44, Alex Leray via ntg-context wrote:
\showframe
\showlayout
\showgrid
\setuplayout[
grid=yes,
]
\define[2]\MySection{\framed[
location=keep,
frame=on,
width=broad,
% height=22pt,
align=middle
]{{#1.\\#2}}}
\setuphead[section][
strut
On 2023-02-15 08:44, Alex Leray via ntg-context wrote:
\showframe
\showlayout
\showgrid
\setuplayout[
grid=yes,
]
\define[2]\MySection{\framed[
location=keep,
frame=on,
width=broad,
% height=22pt,
align=middle
]{{#1.\\#2}}}
\setuphead[section][
strut
On 2023-02-15 08:44, Alex Leray via ntg-context wrote:
\showframe
\showlayout
\showgrid
\setuplayout[
grid=yes,
]
\define[2]\MySection{\framed[
location=keep,
frame=on,
width=broad,
% height=22pt,
align=middle
]{{#1.\\#2}}}
\setuphead[section][
strut
above the
(framed) title and align the section number with the first line (it's on
the second line)
Any idea? Many thanks.
###
\showframe
\showlayout
\showgrid
\setuplayout[
grid=yes,
]
\define[2]\MySection{\framed[
location=keep,
frame=on,
width=broad,
% height=22pt
t=0pt]
> {#2}}
>
> \setuphead
> [chapter]%,section,subsection]
> [command=\ChapterCommand,
>style=\ss\bf\tfd,
>color=darkred]
>
> \setuphead
> [title]%,subject,sububject]
> [command=\TitleCommand,
>style=\ss\bf\tfd,
>color=darkred
ion]
[command=\ChapterCommand,
style=\ss\bf\tfd,
color=darkred]
\setuphead
[title]%,subject,sububject]
[command=\TitleCommand,
style=\ss\bf\tfd,
color=darkred]
\setupbodyfont[bonum,rm,12pt]
\showframe
\starttext
\startchapter[title={Introduction}]
This is the chapter for introduct
Dear list,
I have the following sample:
\showframe
\setuplayout[width=middle]
\definelayout[odd][reset]
\definelayout[even][reset]
\doiftext{\markedpages[zapf]}
{\doloopoverlist{\markedpages[zapf]}
{\definelayout[\recursestring][page]}}
\starttext
\dorecurse{50}{\input
Hi Pablo,
> \showframe
> \setupinteraction[state=start]
> \starttext
> \startbuffer[abc]
> def foo(x):
> if x == 0:
> bar()
> else:
> baz(x)
> foo(x - 1)
> \stopbuffer
> \comment[location=leftmargin,
> space=yes,
> buffer=abc,
> title={P
g your point with the following sample:
\showframe
\setupinteraction[state=start]
\starttext
\startbuffer[abc]
def foo(x):
if x == 0:
bar()
else:
baz(x)
foo(x - 1)
\stopbuffer
\comment[location=leftmargin,
space=yes,
buffer=abc,
title={Python code}]
{}\ty
My MWE below produces this pdf. My problem is that on page 2, the body text
flows beyond its frame and into the footer distance.
Regards, Peter
Play.pdf
Description: Adobe PDF document
MWE:
\setuppapersize[A4][A3,landscape] \setuparranging[2SIDE] \showframe
\definelayout[mypage
> 2 - On pages 5 and 6, the text flows beyond the bottom of the frame.
>> It should stop at the bottom of the frame.
>
> Hi Peter,
>
> as in my reply from yesterday, this seems to fix your bugs:
>
> \showframe
> \setuppapersize[A4][A3,landscape] \setuparranging[2SIDE]
and 6 have the [short] layout. They should have the
> default layout.
>
> 2 - On pages 5 and 6, the text flows beyond the bottom of the frame.
> It should stop at the bottom of the frame.
Hi Peter,
as in my reply from yesterday, this seems to fix your bugs:
\showframe
and the text flows
within the frames.
Peter
%==
\showframe
\setuppapersize[A4][A3,landscape] \setuparranging[2SIDE]
\setuplayout[backspace=80mm, width=100mm, topspace=50mm, header=0mm,
footer=0mm, height=200mm, margindistance=10mm, leftmargin=40mm
the LMTX I updated a few days ago. ConTeXt online’s pdf is the same.
%==
\showframe
\setuppapersize[A4][A3,landscape] \setuparranging[2SIDE]
\setuplayout[backspace=80mm, width=100mm, topspace=50mm, header=0mm,
footer=0mm, height=200mm, margindistance
]
% \showframe
\definefloat
[marginfigure]
[figure]
\setupfloat
[marginfigure]
[outermargindistance=-\outermargintotal,
default={outermargin,height,high,low,none}]
\starttext
\startstaticMPfigure{square}
draw fullsquare scaled 3cm;
\stopstaticMPfigure
\startitemize
\placemarginfigure
document:
\showframe
% \definefontfeature[default][default][expansion=quality]
% \usetypescript[modern-base]
% \setupbodyfont[reset,modern]
% \setupalign[hz]
\startluacode
function userdata.test(head)
local last_line = node.tail(head)
local i = 1
]
\setuplayout
[header=0pt,
margin=4cm,
footerdistance=.5cm,
topspace=1cm,
backspace=1cm,
cutspace=2cm,
width=fit,
height=\dimexpr
\paperheight-\topspace+\footerheight+\footerdistance-4cm\relax]
% \showframe
\definefloat
[marginfigure]
[figure]
\setupfloat
[marginfigure
On 11/21/2022 10:20 AM, Max Chernoff via ntg-context wrote:
Hi Hans,
Font expansion (hz) seems to be enabled by default with the latest
upload.
If I compile this document locally with ConTeXt "2022.11.18 13:22":
\showframe
% \definefontfeature[default][default][expansi
Hi Hans,
Font expansion (hz) seems to be enabled by default with the latest
upload.
If I compile this document locally with ConTeXt "2022.11.18 13:22":
\showframe
% \definefontfeature[default][default][expansion=quality]
% \usetypescript[modern-base]
% \setupbody
t;> Hi,
>>>>> >> I find that for some time (but maybe the problem comes from me !),
>>>>> the
>>>>> >> placement of a figure at the bottom of the page causes a page break
>>>>> when
>>>>> >> it seems to me that there is
seems to me that there is enough space, which poses some problems in
> >> the pagination of my documents.
> >
> > Hi Fabrice,
> >
> > your figure requires about 7¼ lines (one line before, six for the image
> > itself, and some extra space after it).
> >
> >
> Your layout for the first page only allows 43 lines and sample text ends
> on line 37.
>
> Replace \showframe with \showgrid and you will see that there might be
> not enough space to fit the image in the first page.
>
> Add "bottomspace=7.25mm" to the layout for the f
ome problems in
> the pagination of my documents.
Hi Fabrice,
your figure requires about 7¼ lines (one line before, six for the image
itself, and some extra space after it).
Your layout for the first page only allows 43 lines and sample text ends
on line 37.
Replace \showframe with \showgrid a
]
\setupfloat
[recipe]
[default={right,none}]
\showframe
\starttext
\dorecurse{11}{\input ward}
\placerecipe{}{\externalfigure[dum]}
\stoptext
___
If your question is of interest to others as well, please add
On 10/19/2022 8:48 PM, Pablo Rodriguez via ntg-context wrote:
Dear list,
compiling the following sample with current latest (2022.10.15 10:37):
\showframe
\showstruts
\setuppapersize[A6]
\setupnotation[footnote]
[alternative=serried]
\starttext
a\footnote{\input zapf
Dear list,
compiling the following sample with current latest (2022.10.15 10:37):
\showframe
\showstruts
\setuppapersize[A6]
\setupnotation[footnote]
[alternative=serried]
\starttext
a\footnote{\input zapf}
\stoptext
I get the text in the footnote is displaced. It only
On 2022-10-11 15:06, Leah Neukirchen via ntg-context wrote:
Henning Hraban Ramm via ntg-context writes:
Am 11.10.22 um 20:00 schrieb Leah Neukirchen via ntg-context:
Hello,
I noticed the following problem:
\showframe
\startluacode
fonts.protrusions.vectors.pure[0x201C] = { 1, 1
Henning Hraban Ramm via ntg-context writes:
> Am 11.10.22 um 20:00 schrieb Leah Neukirchen via ntg-context:
>> Hello,
>> I noticed the following problem:
>> \showframe
>> \startluacode
>>fonts.protrusions.vectors.pure[0x201C] = { 1, 1 }
>> \stopluacode
Am 11.10.22 um 20:00 schrieb Leah Neukirchen via ntg-context:
Hello,
I noticed the following problem:
\showframe
\startluacode
fonts.protrusions.vectors.pure[0x201C] = { 1, 1 }
\stopluacode
\definefontfeature[default][default][protrusion=pure]
\setupalign[hanging]
\starttext
This text
Hello,
I noticed the following problem:
\showframe
\startluacode
fonts.protrusions.vectors.pure[0x201C] = { 1, 1 }
\stopluacode
\definefontfeature[default][default][protrusion=pure]
\setupalign[hanging]
\starttext
This text is unquoted.
“This text is quoted manually.”
\quotation
Hi Hraban,
> > As soon as I use floats, text isn’t typeset on the grid any more:
> >
> >
> > \setuppaper[A5]
> > \setuplayout[grid=yes]
> > \showframe\showgrid
>
> Oops, my bad: It must be "grid=on".
> But didn’t work "yes"
Am 03.10.22 um 14:02 schrieb Henning Hraban Ramm via ntg-context:
As soon as I use floats, text isn’t typeset on the grid any more:
\setuppaper[A5]
\setuplayout[grid=yes]
\showframe\showgrid
Oops, my bad: It must be "grid=on".
But didn’t work "yes" in earli
As soon as I use floats, text isn’t typeset on the grid any more:
\setuppaper[A5]
\setuplayout[grid=yes]
\showframe\showgrid
\setupexternalfigure[
location={local,global,default},
]
\starttext
\samplefile{lorem}
\startplacefigure[location=left,title=left]%
\externalfigure[mill][width=.25
(see p. 1).
(Number alignment to the right is required.)
Thanks in advance for some hints.
Tomáš
MWE:
\setupnotation[footnote][
alternative=left,
width=1em,
numbercommand={\hfill\high},
]
\starttext
\showframe[text][text]
\dorecurse{6}{This is a text.\footnote{\dorecurse{12}{Blah blah blah
]
\definefontfamily [documentfont] [tt] [Noto Sans Mono]
\setupbodyfont [documentfont,24pt]
\setuppapersize
[A4,landscape,rotated,270]
[A4,portrait]
\setuplayout[middle]
\showframe
\setuphead
[chapter]
[numbercolor=darkred,
conversion=chinesenumerals]
\setuptolerance
[verytolerant,stretch
]
\usebodyfont [mschinese,20pt]
\showframe
\starttext
\dorecurse{5}{“好？！；”“：，。”} % linebreak sutck
\dorecurse{30}{“我”} % linebreak sutck
\dorecurse{30}{我} % linebreak work
\dorecurse{30}{我。} % linebreak work
\stoptext
```
What I see between any two consecutive punctuations are
1
width
punctuations in Chinese document.
```lmtx
\setscript[hanzi]
\usetypescriptfile[mscore]
\usebodyfont [mschinese,20pt]
\showframe
% just for watching node list
% \startluacode
% local watch = require("watch_sys_actions.lua")
% watch.register()
% \stopluacode
\starttext
\d
ootnotes?
>> MWE:
>> \setuppapersize[A10]
>> \overfullrule5\points
>> %\version[temporary]
>> \starttext
>> \showframe
>> XX\footnote{xxx}
>> \stoptext
> \let\dontcomplain\relax
… no, I can't complain ;o)
Thank you! Steffen
On 7/21/2022 5:02 PM, Steffen Wolfrum via ntg-context wrote:
Hi,
the command \version[temporary] shows an overfullrule when lines are set
overfull.
How does this work also in footnotes?
MWE:
\setuppapersize[A10]
\overfullrule5\points
%\version[temporary]
\starttext
\showframe
XX
Hi,
the command \version[temporary] shows an overfullrule when lines are set
overfull.
How does this work also in footnotes?
MWE:
\setuppapersize[A10]
\overfullrule5\points
%\version[temporary]
\starttext
\showframe
XX\footnote{xxx}
\stoptext
Steffen
starttext
\showframe
\startbuffer
row\currentxtablerow--col\currentxtablecolumn
\stopbuffer
\startbuffer[table]
\startxtable[option={stretch, height}, align={lohi, middle}]
\startxrow
\dorecurse{5}
{\startxcell[width=.115\textwidth]\inlinebuffer\
On 6/30/22 09:46, Angel M Alganza via ntg-context wrote:
> [...]
> How about the auto row height? That'd be the only thing I'm missing.
Hi Ángel,
I’m not sure whether I’m totally missing your point, but I think this is
a way that might achieve what you want:
\starttext
\sho
Dear list,
I have the following sample:
\showframe
\setuppapersize[A8]
\setuptyping
[align={right,broad},
strip=yes,
lines=yes,
blank=halfline]
\starttext
\startXML
content content content content
content content
content content
1 - 100 of 1824 matches
Mail list logo
